DuPont™ Tychem® 6000 F Chemical Coverall – Orange. Hooded coverall. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles, face and waist. Self-adhesive double zipper flap and chin flap. Orange.
DuPont™ Tychem® 6000 F Orange. Hooded coverall. Available in orange for high visibility and in sizes MD to 5X. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® 6000 F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents.
Tychem® 6000 F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.
- Certified according to Regulation (EU) 2016/425 (inactive)
- Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
- EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
- Antistatic treatment (EN 1149-5) – on inside
- Stitched and over-taped seams with barrier tape for protection and strength
- Self-adhesive double zipper flap closure system for higher protection
- Also available in grey – please enquire for more details
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
|Property||Test Method||Typical Result||EN|
|Abrasion Resistance 7||EN 530 Method 2||>2000 cycles||6/6 1|
|Basis Weight||DIN EN ISO 536||120 g/m2||N/A|
|Bursting Strength (Mullenburst)||ISO 2758||650 kPa||N/A|
|Exposure to high Temperature||N/A||Garments seams opens at ~98 °C||N/A|
|Flex Cracking Resistance 7||EN ISO 7854 Method B||>1000 cycles||1/6 1|
|Flex Cracking Resistance at -30°C||EN ISO 7854 Method B||>1000 cycles||N/A|
|Puncture Resistance||EN 863||>10 N||2/6 1|
|Resistance to Ignition 7||EN 13274-4 Method 3||No after flame, no drop formation, hole formation||N/A|
|Resistance to water penetration||DIN EN 20811||>30 kPa||N/A|
|Surface Resistance at RH 25%, inside 7||EN 1149-1||< 2,5 • 109 Ohm||N/A|
|Surface Resistance at RH 25%, outside 7||EN 1149-1||No antistatic treatment||N/A|
|Tensile Strength (MD)||DIN EN ISO 13934-1||>100 N||3/6 1|
|Tensile Strength (XD)||DIN EN ISO 13934-1||>100 N||3/6 1|
|Thickness||DIN EN ISO 534||220 µm||N/A|
|Trapezoidal Tear Resistance (MD)||EN ISO 9073-4||>20 N||2/6 1|
|Trapezoidal Tear Resistance (XD)||EN ISO 9073-4||>20 N||2/6 1|
DuPont Part Numbers: