DuPont™ Tychem® 2000 C Chemical Coverall. Hooded coverall. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles, face and waist. Self-adhesive double zipper flap and chin flap. Yellow.
DuPont™ Tychem® 2000 C. Hooded coverall. Available in bright yellow for high visibility and in sizes SM to 3X. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Made from a lightweight and durable fabric (<450g per garment), Tychem® 2000 C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).
Tychem® 2000 C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.
- Certified according to Regulation (EU) 2016/425 (inactive)
- Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
- EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
- Antistatic treatment (EN 1149-5) – on inside
- Stitched and over-taped seams with barrier tape for protection and strength
- Self-adhesive double zipper flap closure system for higher protection
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
|Property||Test Method||Typical Result||EN|
|Abrasion Resistance 7||EN 530 Method 2||>1500 cycles||5/6 1|
|Basis Weight||DIN EN ISO 536||83 g/m2||N/A|
|Bursting Strength (Mullenburst)||ISO 2758||500 kPa||N/A|
|Exposure to high Temperature||N/A||Garments seams opens at ~98 °C||N/A|
|Flex Cracking Resistance 7||EN ISO 7854 Method B||>5000 cycles||3/6 1|
|Flex Cracking Resistance at -30°C||EN ISO 7854 Method B||>500 cycles||N/A|
|Puncture Resistance||EN 863||>10 N||2/6 1|
|Resistance to Ignition 7||EN 13274-4 Method 3||No after flame, no drop formation, hole formation||N/A|
|Resistance to water penetration||DIN EN 20811||>30 kPa||N/A|
|Surface Resistance at RH 25%, inside 7||EN 1149-1||< 2,5 • 109 Ohm||N/A|
|Surface Resistance at RH 25%, outside 7||EN 1149-1||No antistatic treatment||N/A|
|Tensile Strength (MD)||DIN EN ISO 13934-1||>100 N||3/6 1|
|Tensile Strength (XD)||DIN EN ISO 13934-1||>100 N||3/6 1|
|Thickness||DIN EN ISO 534||185 µm||N/A|
|Trapezoidal Tear Resistance (MD)||EN ISO 9073-4||>10 N||1/6 1|
|Trapezoidal Tear Resistance (XD)||EN ISO 9073-4||>10 N||1/6 1|
DuPont Part Numbers: